1/2" x 1000ft PEX-AL-PEX Tubing

1000ft roll of 1/2" PEX-AL-PEX Tubing for use in radiant heating applications.

Meets/exceeds ASTM F1281, CSA B137.10 standards.

Also certified for use in domestic water applications. UPC listed by IAPMO.

Pressure rated at: 80psi @ 200F, 160psi @ 140F, 200psi @ 73F.

Packing: Box.

 

Everhot PEX-AL-PEX Tubing:

• Is manufactured to ASTM F1281 & CSA B137.10 standards.
• Tested and Certified by NSF and complies with NSF/ANSI 61 standard.
• Complies with low lead requirements for the States of California and Vermont.
• Certified to the Uniform Plumbing Code.
• Meets chlorine resistance requirements when tested in accordance with ASTM F2023.

Applications:

1/2" PEX-AL-PEX Tubing is commonly used for radiant heating applications projects such as concrete slabs (wire mesh or rebar reinforced), thin slabs (non-reinforced), below the subfloor heating (staple-up), sandwich type installations (between subfloor and finished floor) and many others.

Typical loop length for 1/2" PEX-AL-PEX varies from 250ft to 350ft, depending of the application, supply temperatures, flow rates, etc. 300ft is considered standard for typical concrete slab install.

Compatibility:

PEX-AL-PEX tubing can be installed using compression style PEX Fittings of Press type system (fittings, sleeves and tools).

This product is a replacement for similar products from brands such as Watts, Mr. PEX, Wirsbo (Uponor) and others.