1/2" PEX x 1/2" PEX Elbow

Everhot

Brand: Everhot

Mfr Part#: BPF6802

Availability: In Stock
Usually ships: Today, if ordered by 3pm
Qty Price
x1
$0.54 / each
x25 $12.00 / bag
(25 x $0.48 / each)
  • Description
  • Reviews (5)
  • FAQs (1)

This product does not meet the new low-lead criteria defined in Safe Drinking Water Act and cannot be used for potable water applications, including for drinking and cooking. This product can be used for non-potable water applications only.

PEX Elbow is used to provide a sharp 90-degree turn where needed.

 

This crimp style PEX fitting can be installed using the following connection systems:

Crimp Connection System (Copper Crimp Rings + PEX Crimp Tool)

Clamp (Cinch) Connection System (Stainless Steel PEX Clamps + PEX Clamp Tool)

 

Manufactured to ASTM F1807.

 

For use with 1/2" PEX Tubing.

1/2" PEX x 1/2" PEX Elbow has an average 5.0 out of 5 rating based on 5 user reviews.
 
Pex elbow - 1/2"
By Mike (from Schuyler, NY) on 1/14/2014
These elbows are as good as any other, and they are much cheaper than other places. They are what they are, and they are great.
Was this review helpful?  Yes / No
 
best price
By Dustin G. (from Islip, NY) on 12/30/2013
these fittings are pretty much the same everywhere, same as sharkbite etc. So really its just where the best price is, which when i bought them was here. I was working with a plumber friend on my house and even with his contractor discount at the local plumbing supply house, everything i bought from there was the same price or less on this site, i would have ordered everything here if i knew before starting the job. We put a new boiler, water heater and all new pex in the house because it was abandoned and copper was stolen. So when i saw everything was cheaper on this site i mean, the fittings, rolls of pex, valves, all the parts for setting up a boiler including the taco boxes and taco circulators.
Was this review helpful?  Yes / No
 
Great price
By Joe C (from Irwin, PA) on 5/6/2013
Even with shipping, these cost way more at the big box stores.
Was this review helpful?  Yes / No
 
Great Value
By BPH8801 (from NH) on 3/1/2012
These work great at a fraction of the cost of a local plumbing supply house (very large plumbing supply house). Great product.
Was this review helpful?  Yes / No
 
Great for sharp turns
By Gia (from NJ) on 6/15/2011
Works beautifully if you have a sharp turn; less pressure on the pex.
Was this review helpful?  Yes / No
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
What is the difference between the regular fitting and the lead free fitting? Are they both brass?
Read 1 answer
Yes, they are both brass. The difference is in the composition of the alloy:
Lead-free fittings are made from C46500 alloy brass, which has less than 0.25% lead by weight as required by the Safe Drinking Water Act (which came into effect nationwide on January 1, 2014). These fittings are therefore suitable for potable water applications.
Regular brass fittings are made from C35200 alloy, which has more than 0.25% lead by weight and is therefore not approved for potable water use, but can still be used for PEX heating applications and for non-potable water applications.
Both alloys are DZR (DeZincification Resistant) brass.
Answered on 6/10/2015 by PexUniverse Customer Service
Was this answer helpful?  Yes / No

Similar products

The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):