Honeywell S8910U1000 Hot Surface Ignition Control Module

Universal Hot Surface Ignition Module

Honeywell

Brand: Honeywell

Mfr Part#: S8910U1000

UPC#: 085267141246

Availability: In Stock
Usually ships: within 1 business day
Qty Price
$102.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs

Honeywell S8910U1000 One or Two Rod Hot Surface Ignition Control has 4 or 7 second trial time and 4 or 7 second lockout timing.

Universal Hot Surface Ignition Module is designed to provide easy field replacement of a wide range of hot surface ignition modules manufactured by Honeywell, Robertshaw and White-Rodgers. The Honeywell S8910U1000 Module provides operating control of a direct ignition system using a 120 Vac hot surface igniter.

 

Features:

  • Replaces many White-Rodgers, Robertshaw and Honeywell hot surface ignition models;
  • For 120 Vac (up to 5.0A) surface igniter (Norton 201/271 or equivalent);
  • For local (single rod) or remote (dual rod) rectification type flame sensing;
  • Contains easy-to-use instructions plus the accessories required to adapt the existing hot surface ignition module;
  • Provides one or three ignition trials (four-second or seven-second trials) per call for heat; prepurge of 32 seconds or less; up to 96 seconds between purge trial times;
  • Temperature range is -40 to +175F (-40 to +79 C);

 

Technical Specifications of Honeywell S8910U1000:

  • Ignition System Type: Direct Hot Surface Ignition;
  • Ignition Sequence: The number of trials for ignition and trial time is determined by the selection tab. If a selection tab is not installed, the module will operate at four seconds trial time and one ignition trial;
  • Typical Gas Control: VR8205, VR8305;
  • Type of Gas: Natural or LP;
  • Flame Sense: Single Rod or Two Rods;
  • Ignition Source: Line Voltage (120 VAC) Hot Surface Element (Norton Model 201 or 270);
  • PrePurge: 32 seconds;
  • Ignition Trials To Lockout: 1 or 3;
  • Lockout Timing: 4 sec. or 7 sec.;
  • Ignition Trial Time (sec): 4 sec. or 7 sec.;
  • Maximum Valve Load @ 24 Vac (Amps): 2A;
  • Typical Ignition Hardware: Norton 201, Norton 271, Q354;
  • Dimensions: 5-1/4" high x 4-1/16" wide x 1-15/16" long;
  • Electrical Ratings: 24 Vac;
  • Frequency: 60 Hz;
  • Maximum Ambient Temperature: -40F to +175F;
  • Approvals, Canadian Standards Association: Design Certified;
  • Tradeline Value: Super Tradeline;
  • Between Trial Time (sec): (2) 96 sec.- 3 trial mode only;
  • Flame Failure Response Time (sec): 1.5 sec.;
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):