Honeywell S9200U1000 Hot Surface Ignition Integrated Furnace Control Module
Honeywell S9200U1000 Hot Surface Ignition Integrated Furnace Control Module (Uni

Universal Hot Surface Ignition Integrated Furnace Control


Brand: Honeywell

Mfr Part#: S9200U1000

UPC#: 085267316149

Availability: In Stock
Usually ships: within 1 business day
Qty Price
$89.95 / each
  • Description
  • Literature
  • Reviews (1)
  • FAQs

Honeywell S9200U1000Universal Hot Surface Ignition Integrated Furnace Control controls a standard induction-type circulating fan motor.

The S9200U1000 Honeywell Ignition Control Module can be used with conventional thermostats as well as the EnviraCOM enabled Vision PRO IAQ and Focus PRO. Honeywell S9200U1000 is intended for residential natural or liquid propane fueled furnaces only. The S9200U1000 EnviraCOM communications capability allows its use in twinning applications and enables communication with local and remote diagnostic devices such as the QuickLook hand held device (QuickLook 72), EnviraLINK web-based application and the W8735D Telephone Access Module (TAM).



  • Main burner ignition using a 120V hot surface igniter;
  • Flame rectification circuit to monitor flame presence;
  • Monitoring of system pressure switch, high temperature limit, and rollout functions;
  • Appliance operation/safety requirements controlled via microprocessor;
  • Control of a standard induction-type circulating fan motor (based on appliance requirements), in response to a conventional low voltage or EnviraCOM thermostat;
  • LED system status, performance and diagnostic indication;
  • Wire harnesses provided for simple replacement of most IFCs and integration with most heating and cooling appliances;
  • Twinning capability;
  • EnviraCOM communication capability to enable local and/or remote system status, diagnostics, troubleshooting, and HVAC system control;


Technical Specifications of Honeywell S9200U1000:

  • Line Voltage: 120Vac (97-132 Vac);
  • Low Voltage: 24V (18-30Vac);
  • Frequency: 60 Hz;
  • Operating Temperature: -40F to +175F;
  • Operating Humidity Range (% RH:) 0% to 95% non-condensing;
  • Igniter Current: 1.0A resistive @ 95Vac output;
  • Thermostat Anticipator Setting: (Stage 1 only) 100mA;
  • PrePurge: 30 seconds;
  • HSI Warmup Time: 17/27 or 30/30 seconds;
  • Trial For Ignition: 4, 6, or 8 seconds;
  • PostPurge: 15 seconds;
  • Interpurge: 60 seconds;
  • Ignition Trials: Three, two tries if flame is not sensed;
  • Flame Failure Response Time: 2 Seconds max @ 1
Universal Hot Surface Ignition Integrated Furnace Control has an average 4.0 out of 5 rating based on 1 user review.
i would buy this again
By the little fireman (from port stanley on) on 9/20/2011
had to rewire the wiring harness but it works well
Was this review helpful?  Yes / No
Indicate an email address where you wish to receive the answer to your question.
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×

Forgot Your Password?

Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.


Estimate Delivery Date & Cost

Ship to Zip Code:
Qty (Optional):