1/2" NPT, Direct Ignition, Standard Opening SmartValve, NG/LP

Honeywell

Brand: Honeywell

Mfr Part#: SV9510M2511

Availability: In Stock
Usually ships: Today, if ordered by 3pm
Qty Price
x1
$186.95 / each & Free Shipping
x3 $539.85 / box & Free Shipping
(3 x $179.95 / each)
  • Description
  • Literature
  • Reviews
  • FAQs

The SmartValve System Controls combine gas flow control and electronic direct main burner ignition sequencing functions into a single unit. The ignition source is 120V hot surface igniter lighting the main burner flame. Provides all gas ignition safety functions by controlling gas flow, ignition source, and a 120 Vac combustion air blower. The control also monitors the appliance airflow proving switch circuit and limit string to assure proper appliance operation. The SmartValve System Controls provide prepurge, postpurge and timed trial for ignition with multiple ignition trials and auto reset from lockout. Diagnostic LED indicates system status.


Features:

  • The control communicates directly with the ST9160 Electronic Fan Timer (EFT) in typical forced warm air furnace applications;
  • It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications;
  • When controlled directly by a thermostat, the control does not provide a postpurge function, as power to the control is removed when the thermostat call for heat ends;
  • This system is suitable for a wide range of fan-assisted combustion, gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances.

Technical Specifications:

  • Electrical Ratings: 24 Vac;
  • Frequency: 50 Hz; 60 Hz;
  • Flame Failure Response Time: 2 sec @ 5µA;
  • PrePurge: 15 seconds;
  • Ambient Temperature Range: -40°F to +175°F (-40°C to +79°C);
  • Ignition System Type: Direct Hot Surface Ignition;
  • Ignition Sequence: 17/27 seconds;
  • Type of Gas: Natural;
  • Flame Sense: Two Rod;
  • Ignition Trials To Lockout: 4 trials;
  • Ignition Trial Time (sec): 7 seconds;
  • Body Pattern: Straight-through;
  • Opening Characteristics: Standard Opening;
  • Pressure Regulator Setting: 3.5in. wc (0.87 kPa);
  • Pressure Ratings: 1/2 psi (3.5 kPa);
  • Inlet/Outlet Size (in.): 1/2" NPT x 1/2" NPT;
  • Maximum Capacity: 200 ft³/hr (5.7 m³/hr), 150 ft³/hr (4.2 m³/hr) @ 1in. P.D.;
  • Minimum Capacity: 20 ft³/hr (0.6 m³/hr);
  • Dimensions (Width x Height x Length): 3.2" x 4.9" x 4.1" (81mm x 124mm x 104mm);
  • Includes: LP Conversion Kit;
  • Mounting: 0° to 90° in any direction from the upright position of the gas control knob, including vertically;
  • Voltage: Call for heat 24 Vac, 60 Hz;
  • Pressure Tapping: 1/8" - NPT.
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):