Standing to Intermittent Pilot Conversion Kit


Brand: Honeywell

Mfr Part#: Y8610U6006

UPC#: 085267311526

Availability: In Stock
Usually ships: within 1 business day
Qty Price
$226.95 / each & Free Shipping
x2 $441.90 & Free Shipping
(2 x $220.95 / each)
  • Description
  • Literature
  • Reviews (2)
  • FAQs

Honeywell Y8610U6006 Standing to Intermittent Pilot Conversion Kit includes S8610U3009 Intermittent Pilot Module, VR8304M Dual Valve Combination Gas Control with 1/2" x 3/4" inlet/outlet, flange kit, LP conversion kit

The Honeywell Y8610U6006 is a complete kit for converting conventional standing pilot systems to intermittent pilot systems. It is used on gas-fired atmospheric furnaces, boilers, and heating appliances. Not for use on direct vent, induced draft, or power burner equipment. Meets ANSI Z21.71 standard for automatic intermittent pilot ignition systems on central furnaces and boilers.

Honeywell Y8610U6006 kits can be used with either natural or LP gas: provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated.

The S8610U ignition control provides a 90 second maximum ignition trial, shuts off, waits five minutes nominal, then re-initiates the pilot ignition sequence. The ignition trial, shutoff, and wait cycle repeat until the pilot lights or the call for heat ends.


Technical Specifications of Honeywell Y8610U6006:

  • Ignition System Type: Intermittent Pilot;
  • Ignition Sequence: Continuous retry, after trial for ignition, pilot gas shuts off for 5 minutes, then another trial for pilot ignition takes place;
  • Typical Gas Control: VR8204, VR8304;
  • Type of Gas: Natural or LP;
  • Flame Sense: Single Rod or Two Rods;
  • Ignition Source: Internal high voltage spark generator;
  • PrePurge: 0 or 30 seconds;
  • Ignition Trials To Lockout: continuous retry;
  • Lockout Timing: 15 or 90 seconds;
  • Ignition Trial Time (sec): 15 or 90 seconds;
  • Maximum Valve Load @ 24 Vac (Amps): 1A Pilot, 2A Main @ 24Vac;
  • Typical Ignition Hardware: Q345, Q3451;
  • Dimensions: 3 15/16" high x 5 7/16" wide x 2 5/8" deep;
  • Electrical Ratings: 24 Vac;
  • Frequency: 60 Hz;
  • Maximum Ambient Temperature: -40F to +165F;
  • Includes: VR8304M3558 (1/2 x 3/4; 3.5" setting; 270kBtu/hr at 1" p.d.);
  • Flame Failure Response Time (sec): 2.0 sec;
Standing to Intermittent Pilot Conversion Kit has an average 5.0 out of 5 rating based on 2 user reviews.
Great product and Savings with Pex Univers
By Monte S. (from Monroe Ohio) on 12/26/2012
Great product, i changed boilers from standing pilot to intermittent spark. Fabulous product and easy to install. Pex Universe is great to do business with and has the best prices by far.
Was this review helpful?  Yes / No
Want to save money?
By GTORACER (from Dover,NJ) on 1/5/2012
This kit works like a charm.It's very complete and fairly easy to implement if you have some controls knowledge. It's not for the clueless amature. PS. The optional call for heat terminal on the new control unit is not optional and should be tied to the 24vac return from the stat, at least in my application.
Was this review helpful?  Yes / No
Indicate an email address where you wish to receive the answer to your question.
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×

Forgot Your Password?

Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.


Estimate Delivery Date & Cost

Ship to Zip Code:
Qty (Optional):