Click on image to enlarge

SumpJet Water Powered Backup Sump Pump

Liberty Pumps

Brand: Liberty Pumps

Mfr Part#: SJ10

UPC#: 671812113655


Availability: In Stock
Usually ships: within 1 business day
Qty Price
$167.00 / each Add to card
Add to cart
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
  • Description
  • Literature
  • Reviews
  • FAQs

The Liberty Pumps SumpJet SJ10 is a water-powered, sump-pump back-up system with a 1-1/2" discharge. The Liberty SJ10 requires no electricity to be operated and serves as an emergency back-up to an existing pump system during power outages. This back-up system is fully automatic and uses the municipal water supply to evacuate water from the sump. It accepts 20PSI to 100PSI inlet supply pressure. The Liberty Pump SJ10 is not intended to be used as the main sump water removal pump.

 

This sumpjet has a compact design and high-output flow rates. It removes 2 gallons of sump water for every 1 gallon used. It comes fully-assembled and is equipped with a SharkBite push-type fitting inlet. This fitting can be used with various approved 3/4-inch portable water tubing and pipe, such as PRX tubing, copper pipe, or copper tube size CPVC pipe. A garden hose should not be used with this sumpjet. They are not designed to hold municipal pressure indefinitely and could leak or burst, causing flooding. The Liberty Pump SJ10 has a foot valve installed so there is no need for a check valve on the discharge.

 

The sumpjet is intended to remove clear sump water only. It is not designed to remove waste water, sewage, effluent, or water with debris in it. The Liberty Pump SJ10 needs an uninterrupted water source to operate and will not operate in the event of power outages.


Features:

  • Accepts 20PSI up to 100PSI inlet supply pressure;
  • Fully automatic;
  • High-output flow rates;
  • Compact design;
  • Fully-assembled;
  • 1-1/2" Discharge;
  • Works off municipal water supply;
  • 3/4 " NPT water inlet connection;
  • UPC approved (IAPMO PS 119-2005);
  • SHARKBITE inlet connection accepts pex, copper or CTS CPVC 3/4" line;
  • Adjustable stainless hose clamp for easy mounting;
  • Removes 2 gallons of water for each 1 gallon used. (based on 5' lift);
  • Fully assembled, compact design ;
  • Built-in screen with removable foot valve;
  • Constructed of durable PVC;

Technical Specifications:

  • Inlet Connection: 3/4" SHARKBITE fitting;
  • Discharge Size: 1-1/2";
  • Maximum fluid temperature: 130°F;
  • Major Height: 21.6";
  • Major Width: 5.1";
  • Weight: 3.5 lbs.;
SumpJet Water Powered Backup Sump Pump has an average 4.5 out of 5 rating based on 2 user reviews.
 
Product installed ok after some mods
By BritGent (from Washington MI) on 11/8/2011
Product had to be installed low down in my sump to reach correct operational height. This required additional water inlet fittings, but appears to function as descibed.
 
Works Great!!!!!!!!!!!!!!!
By TKing88 (from Hubbard ,Ohio) on 7/15/2011
Was easy to install. It works as expected. The price was great. It not that noisy as other people say.
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.

The following was added to your shopping cart: X
Continue shoppingCartProceed to Checkout
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.