Little Giant HT-10E-CIM Effluent Pump 511610 w/ CordLittle Giant HT-10E-CIM Effluent Pump 511610 SideLittle Giant HT-10E-CIM Effluent Pump 511610 IntakeLittle Giant HT-10E-CIM Effluent Pump 511610 Box
Little Giant HT-10E-CIM Effluent Pump 511610 Front

HT-10E-CIM Manual High Temperature Sump/Effluent Pump w/ 15' cord, 1/2 HP, 115V

Little Giant

Brand: Little Giant

Mfr Part#: 511610

Model: HT-10E-CIM

UPC#: 010121116009

Usually ships: within 3-4 business days
Qty Price
$429.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs

Little Giant HT-10E-CIM (511610) is a Manual Submersible High Temperature Effluent Sump Pump 1/2 HP, 115 Volts, 25' power cord - Eliminator Series, designed to handle liquid and solid waste in temperatures up to 200F, recommended for applications such as boiler blowdown pits, plant washdown units, public utility underground transformer vaults and industrial steam cleaning pits. HT-10E Series Effluent Pump is suitable for pumping basement drainage water, effluent, wastewater and other non-explosive, non-corrosive, non-abrasive liquids with up to 3/4" spherical solids handling ability, with a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

The Eliminator submersible HT-10E Series De-watering and Effluent Pump features a vertical 1 1/2" FNPT discharge with head capacity of 24', high-temperature thermoplastic base and heat resistant float. HT-10E-CIM Eliminator Submersible Effluent Pump handles liquids up to 3/4" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant HT-10E-CIM has an epoxy coated cast iron housing and cover to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life.

Little Giant HT-10E-CIM boasts Vortex nylon impeller, maximum 200F operating temperature, mechanical seals (stainless steel spring, carbon and ni-resist faces, Viton parts and Shaft seal) and 300 Series stainless steel Hardware. Oil filled motor housing of HT-10E-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 1/2 HP Split Phase motor with automatic reset thermal overload protection delivers 80 GPM of wastewater at 5' total dynamic head. This newest HT-10E-CIM Eliminator High Temperature Effluent Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.


Features:

  • 1/2 HP Split Phase motor with overload protection;
  • Designed for continuous duty;
  • Handles liquids up to 200F;
  • 3/4" solids handling capability;
  • Cast iron pump housing with protective epoxy coating for corrosion resistance;
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation;
  • Stainless steel screws, bolts and lifting ring to protect against corrosion;
  • Mechanical seals (stainless steel spring, Carbon and Ni-Resist faces, Viton Shaft seal) to assure maximum protection against pump failure;
  • Bearings: Upper and lower ball bearings for extended motor life;
  • 1 1/2" FNPT Discharge;
  • CSA listed;

Technical Specifications:

  • Motor: 1/2 HP Split Phase;
  • Maximum flow rate: 80 GPM @ 5';
  • Maximum Head: 24';
  • Solids handling (dia.): 3/4";
  • Max Liquid Temp: 200F;
  • Discharge: 1 1/2" FNPT;
  • Cord Length: 25';
  • Voltage:115 V;
  • Hertz: 60 Hz;
  • Amps: 10.5 A;
  • Watts: 900 W;
  • Weight: 38 lbs.;
  • Height: 10.25";
  • Width: 9.13";
  • Length: 9.6";

Warranty:

1 year manufacturers warranty from the date of purchase.
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):