Little Giant 16EH-CIM Effluent Pump 514550

16EH-CIM Manual Effluent Pump w/ 20' cord, 1 HP, 575V, 3-Phase

Little Giant

Brand: Little Giant

Mfr Part#: 514550

Model: 16EH-CIM

UPC#: 010121145504

Usually ships: within 7-10 business days
Qty Price
$748.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs

Little Giant 16EH-CIM (514550) is a Manual Submersible Eliminator Effluent Sump Pump - High Head Series, 1 HP, 575 Volts, 60 Hz, recommended for use in sumps, basins or lift stations and is suitable for pumping sewage, effluent, wastewater and other non-explosive, non-corrosive liquids with a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

The 16EH Series dewatering and Effluent pump features a vertical 2" FNPT discharge with head capacity of 81' and ABS base. 16EH-CIM Eliminator Submersible Effluent Pump was specifically engineered to handle liquids and up to 3/4" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant 16EH-CIM has an epoxy coated heavy-duty cast iron housing, volute and impeller, to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life.

Little Giant 16EH-CIM boasts non-clog Impeller with pressure relief vanes, maximum 140F operating temperature, mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic shaft seal) and 300 Series stainless steel hardware. Oil filled motor housing of 16EH-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 1 HP, single phase induction 3450 RPM motor with automatic reset thermal overload protection delivers 90 GPM of wastewater at 30' total dynamic head. This newest 16EH-CIM Eliminator Submersible High Head Effluent Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.


Features:

  • High head, 575 Volts model;
  • Completely submersible, designed for continuous duty;
  • Carbon/ceramic shaft seal;
  • Handles liquids and solid waste materials up to 3/4 diameter;
  • 1 HP PSC motor with overload protection;
  • Port Size: 2" FNPT discharge w/ 3/4" Solids Handling;
  • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance;
  • Oil-filled motor housings for lifetime lubrication and rapid heat dissipation;
  • Stainless steel screws, bolts and lifting ring;
  • Upper and lower ball bearings;
  • Mechanical seal (stainless steel spring, nitrite parts, carbon and ceramic faces) for long life and reliability;
  • Secondary Exclusion Seal to help protect mechanical seal;
  • High Speed (3450 RPM) 1 HP, ball bearing motor and thermal overload protection for high head operation, Permanent split capacitor design;
  • Capacitor and power cord connections isolated from oil filled motor housing for ease of field maintenance;
  • Dynamically balanced two-vane non-clogging impeller with pump-out vanes to enhance pumping performance and efficiency;
  • UL / CSA listed;

Technical Specifications:

  • Motor: 1HP Permanent Split, Capacitor on single phase;
  • Maximum flow rate: 90 GPM @ 30';
  • Maximum Head: 81';
  • Solids handling (dia.): 3/4";
  • Max Liquid Temp: 140F;
  • Discharge: 2" FNPT;
  • Cord Length: 20';
  • Shut Off: 81';
  • Voltage: 575 V;
  • Hertz: 60 Hz;
  • Amps: 2.5 A;
  • Watts: 1350 W;
  • Weight: 82 lbs.;
  • Height: 16.2";
  • Width: 9.9";
  • Length: 14.1";

Warranty:

2 years manufacturers warranty from the date of purchase.
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):