Little Giant 18S-CIM Sewage Pump 520301

18S-CIM Manual Sewage Pump w/ 20' cord, 1-1/2 HP, 230V

Little Giant

Brand: Little Giant

Mfr Part#: 520301

Model: 18S-CIM

UPC#: 010121114302

Usually ships: within 3-4 business days
Qty Price
$825.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs

Little Giant 18S-CIM (520301)is a Manual Submersible Sewage Ejector Pump 1.5 HP, 230V, 20ft power cord - Dominator 18S Series, recommended for use in sumps, basins or lift stations and is suitable for pumping sewage, effluent, wastewater and other non-explosive, non-corrosive liquids with a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

18S-CIM Dominator submersible Sewage Ejector Pump features a vertical 3" FNPT discharge with head capacity of 64' and ABS base. The 18S Series Pump was specifically engineered to handle liquids and up to 2" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant 18S-CIM has an epoxy coated heavy-duty cast iron housing and volute, to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life. Little Giant 18S-CIM boasts non-clog brass Impeller with pressure relief vanes for enhance pumping performance and efficiency, maximum 140F operating temperature, exclusion seal, mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic shaft seal) and 300 Series stainless steel hardware. Oil filled motor housing of 18S-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 1.5 HP, single phase induction 3100 RPM motor with automatic reset thermal overload protection delivers 160 GPM of wastewater at 10' total dynamic head. This newest 18S-CIM Submersible Sewage Ejector Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.


Features:

  • 1.5 HP (ball bearing) permanent spilt capacitor motor with overload protection;
  • Handles liquids and solid waste materials up to 2" diameter;
  • Cast iron pump housing with protective epoxy coating for corrosion resistance;
  • 3" FNPT discharge;
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation;
  • Stainless steel hardware;
  • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability;
  • Exclusion seal;
  • Capacitor & power cord isolated from oil-filled motor housing for ease of field maintenance;
  • Brass impeller;
  • UL/CSA listed;

Technical Specifications:

  • Horsepower: 1.5 HP;
  • Flow: 160 GPM @ 10';
  • Cord Length: 20';
  • Shut Off: 64';
  • Voltage: 230 V;
  • Hertz: 60 Hz;
  • Amps: 15.5 A;
  • Weight: 96 lbs.;
  • Height: 19.07";
  • Width: 8.4";
  • Length: 12.93";
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):