Little Giant TE-5-MD-HC Magnetic Drive Pump 584604 Front 2Little Giant TE-5-MD-HC Magnetic Drive Pump 584604 Side 1Little Giant TE-5-MD-HC Magnetic Drive Pump 584604 Side 2Little Giant TE-5-MD-HC Magnetic Drive Pump 584604 BoxLittle Giant TE-5-MD-HC Magnetic Drive Pump 584604 Chart
Little Giant TE-5-MD-HC Magnetic Drive Pump 584604 Front 1

TE-5-MD-HC Magnetic Drive Pump for Highly Corrosive, 1/8 HP, 115/230V

Little Giant

Brand: Little Giant

Mfr Part#: 584604

Model: TE-5-MD-HC

UPC#: 010121846043

Availability: In Stock
Usually ships: Today, if ordered by 3pm
Qty Price
$452.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs

Little Giant TE-5-MD-HC (584604) is a Magnetic Drive Pump, 6' power cord, 1/8 HP, Dual Voltage 115/230 V, 50/60 Hz - MD-HC Series for highly corrosive chemicals and solutions, acids, alkalis, solvents, plating solutions, sterile solutions and other special fluids. Designed for in-line, non-submersed use in environments such as hospitals, chemical companies, photo labs, dry cleaning plants, car washes, machine shops, laboratories, manufacturing plants, print shops and wineries.

TE-5-MD-HC Magnetic Drive Pump features a 1/2" MNPT discharge with head capacity of 29.3'. The TE-5-MD-HC with a 1" FNPT Intake was specifically engineered to handle highly corrosive fluids with high efficiency and long term dependability. Little Giant TE-5-MD-HC has glass-filled polypropylene sulfide (Ryton) magnet housing, volute and impeller to ensure ultimate chemical resistance. Only chemical resistant materials are in contact with fluids. Glass-filled polypropylene sulfide Impeller with carbon bushing allows a Run-dry capability of up to eight hours without damage. Little Giant TE-5-MD-HC boasts leakproof, seal-less magnetic drive, Fluid Temperature operation up to 200F and Ambient Air Temperature up to 77F. Ceramic shaft seal, thrust washers and Viton parts are 99.5% pure alumina provide a longer service life, excellent wear and trouble-free service. Little Giant's powerful 1/8 HP TEFC PSC thermally protected, totally enclosed, fan-cooled motor with ball bearings and thermal overload protection delivers 17 GPM of fluids at 9' total dynamic head. Pumping heads are easily rotated, cleaned or serviced with no special tools required. 6' power cord and 3-prong molded plug supplied but not installed.


Features:

  • Run-dry capability up to 8 hours;
  • Specific Gravity - up to 1.1;
  • Ambient Air Temperature - up to 77F;
  • Fluid Temperature - up to 200F;
  • 6' power cord with 3-prong plug (supplied but not installed);
  • Thermally protected, totally enclosed, permanent split capacitor motor;
  • Ball bearings;
  • Listings: UR/C-CSA;

Technical Specifications:

  • Motor: 1/8 HP TEFC PSC;
  • RPM: 2850/3450;
  • Maximum flow rate: 20GPM (17 GPM @ 9');
  • Maximum Head: 29.3';
  • Intermittent Liquid Temp: 200F;
  • Specific gravity: 1.1;
  • Intake: 1" FNPT;
  • Discharge: 1/2" MNPT;
  • Cord Length: 6';
  • Voltage: 115/230 V;
  • Hertz: 50/60 Hz;
  • Amps: 3.0/1.4 A;
  • Watts: 325 W;
  • Weight: 28 lbs;
  • Height: 7.3";
  • Width: 5.2";
  • Length: 11.2";

Warranty:

1 year manufacturers warranty from the date of purchase.
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):