Little Giant 9EN-CIM (509208) Manual Submersible Sump/Effluent Pump, High Head, 115V, 4/10HP, 30' cord

Little Giant 9EN-CIM (509208) is a Manual submersible Eliminator Effluent sump Pump - High Head Series with manual switch, 1/4HP, 30' power cord, 115 Volts, 60 Hz, recommended for use in normal sump and general dewatering applications where higher pressure is required and is suitable for pumping basement drainage water, effluent, wastewater and other non-explosive, non-corrosive, non-abrasive liquids with up to 3/4" spherical solids handling ability, with a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

The 9EN Series De-watering and Effluent pump was especially designed for residential, commercial, industrial and agricultural applications with light to medium transfer demands. Little Giant 9EN-CIM features a vertical 1 1/2" FNPT discharge with head capacity of 32', glass-filled nylon cover and ABS base. 9EN-CIM Eliminator Submersible Effluent Pump was specifically engineered to handle liquids and up to 3/4" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant 9EN-CIM has an epoxy coated cast iron housing and glass-filled nylon cover to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life. Little Giant 9EN-CIM boasts Closed Vane design Imperler with stainless steel wear ring, maximum 140F operating temperature, mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic shaft seal) and 300 Series stainless steel Hardware. Oil filled motor housing of 9EN-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 4/10 HP, single phase induction motor with automatic reset thermal overload protection delivers 80 GPM of wastewater at 5' total dynamic head. This newest 9EN-CIM Eliminator Effluent Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.