Stiebel Eltron Tempra 12 B Electric Tankless Water Heater

When compared to gas type tankless water heaters, Stiebel Eltron Tempra 12B, cost less and is less expensive to install, since it does not require venting parts.

While gas type tankless water heaters with outside venting may have a 5-20% efficiency reduction (due to heat loss from gases escaping through the vent), Stiebel Eltron Tempra 12B is designed to be virtually 100% efficient.

Multiple heating elements inside the Tempra 12B models activate as the water demand increases, thus providing maximum efficiency and complete comfort.

Tempra 12B model Capacity:

1 baths in warmer climates (average incoming water temperature is 70F) or

For more information on sizing, see manufactuter's brochure or climate map & sizing guide.

Tempra 12B Technical Specifications:

Flow Rate: 0.37 - 3.0 GPM;

Maximum Operating Pressure: 150 PSI;

Hot / Cold inlet connections: 3/4" male threaded (Male NPT);

Dimensions (Width x Height x Depth): 16 5/8" x 14 1/2" x 4 5/8";

Weight: 13.2 lbs;

Tempra 12B Electrical Specifications:

Voltage: 208V/240V;

Amperage: 44 Amps at 208V / 50 Amps at 240V;

Phase: 1;

Wattage: 9 kW at 208V / 12 kW at 240V;

Min. Circuit Breaker Size Required: 60 Amps;

Recommended Wire Size: 6 AWG copper;

Warranty:

3 year limited warranty by the manufacturer.