Stiebel Eltron Tempra 24 B Electric Tankless Water Heater

(2) Flexible Water Heater Connectors are included FREE with every Stiebel Eltron Tempra model.

When compared to gas type tankless water heaters, Stiebel Eltron Tempra 24, cost less and is less expensive to install, since it does not require venting parts.

While gas type tankless water heaters with outside venting may have a 5-20% efficiency reduction (due to heat loss from gases escaping through the vent), Stiebel Eltron Tempra 24 is designed to be virtually 100% efficient.

Multiple heating elements inside the Tempra 24 models activate as the water demand increases, thus providing maximum efficiency and complete comfort.

Tempra 24 B model Capacity:

Up to 3 baths in warmer climates (average incoming water temperature is 70F) or

up to 2 baths in cooler climates (average incoming water temperature is 40F).

For more information on sizing, see manufactuter's brochure or climate map & sizing guide.

Tempra 24 B Technical Specifications:

Flow Rate: 0.58 - 4.5 GPM;

Maximum Operating Pressure: 150 PSI;

Hot / Cold inlet connections: 3/4" male threaded (Male NPT);

Dimensions (Width x Height x Depth): 16 5/8" x 14 1/2" x 4 5/8";

Weight: 15.4 lbs;

Tempra 24 B Electrical Specifications:

Voltage: 208V/240V;

Amperage: 88 Amps at 208V / 100 Amps at 240V;

Phase: 2 x single;

Wattage: 18.0 kW at 208V / 24.0 kW at 240V;

Min. Circuit Breaker Size Required: 2 x 60 Amps;

Recommended Wire Size: 2 x 6 AWG copper;

Warranty:

3 year limited warranty by the manufacturer.

Literature:

Brochure and Sizing Information (pdf)

Installation Instructions and Warranty Information (pdf)