Tempra 36 Plus Electric Tankless Water Heater, 36kW
Brand: Stiebel Eltron
Mfr Part#: Tempra 36 Plus
When compared to gas type tankless water heaters, Stiebel Eltron Tempra 36 Plus cost less and is less expensive to install, since it does not require venting parts.
While gas type tankless water heaters with outside venting may have a 5-20% efficiency reduction (due to heat loss from gases escaping through the vent), Stiebel Eltron Tempra 36 Plus is designed to be virtually 100% efficient.
Multiple heating elements inside the Tempra 36 Plus models activate as the water demand increases, thus providing maximum efficiency and complete comfort. The Advanced Flow Control system, available in Plus models only, monitors and adjusts the water flow to assure a constant temperature output.
Tempra 36 Plus model Capacity:
Up to 4 baths in warmer climates (average incoming water temperature is 70F) or
up to 3 baths in cooler climates (average incoming water temperature is 40F).
For more information on sizing, see manufactuter's brochure or climate map & sizing guide.
Tempra 36 Plus Technical Specifications:
Flow Rate: 0.87 - 4.5 GPM;
Maximum Operating Pressure: 150 PSI;
Hot / Cold inlet connections: 3/4" male threaded (Male NPT);
Dimensions (Width x Height x Depth): 16 5/8" x 14 1/2" x 4 5/8";
Weight: 17.6 lbs;
Tempra 36 Plus Electrical Specifications:
Amperage: 132 Amps at 208V / 150 Amps at 240V;
Phase: 3 x single;
Wattage: 27.0 kW at 208V / 36.0 kW at 240V;
Min. Circuit Breaker Size Required: 3 x 60 Amps;
Recommended Wire Size: 3 x 6 AWG copper;
3 year limited warranty by the manufacturer.