3/4" x 300ft PEX Tubing with Oxygen Barrier

300ft roll of 3/4" PEX Tubing with Oxygen Barrier for use in radiant heating systems. This product meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards and backed by a 25 year manufacturer warranty. Certified for use in radiant floor heating applications. UPC listed by IAPMO. PPI pressure rated at: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F Weight: 37.0 lbs Box dimensions: 30" x 30" x 10"

 

Everhot PEX Tubing with Oxygen Barrier:

• Is manufactured to ASTM F876/F877 & CSA B137.5 standards.
• Tested and Certified by NSF and complies with NSF/ANSI 61 standard.
• Complies with low lead requirements for the States of California and Vermont.
• Certified to the Uniform Plumbing Code.
• Meets chlorine resistance requirements when tested in accordance with ASTM F2023.

Applications:

3/4" PEX Tubing with Oxygen Barrier can be used for the following heating applications:

1. Structural Concrete Slabs (Rebar or wire mesh reinforced, 4-6" thick). Slab-On-Grade Systems (larger garages, warehouses and other storage and commercial facilities). 3/4" PEX Tubing is secured on top of the reinforcement with wire ties, zip ties or clips.

2. Snow Melt Systems (reinforced structural slabs). Similar to radiant heated slabs, but does not require insulation and requires a proper drainage system.

3. Copper tube finned baseboard radiators, cast iron and aluminum radiators.

4. Fan coil units and water to air heat exchnagers.

Compatibility:

Everhot Oxygen Barrier PEX Tubing can be installed using either Crimp type connection system (Crimp Tool, Crimp-style PEX Fittings and Copper Crimp Rings) or Clamp/Cinch type connection system (Clamp Tool, Crimp-style PEX Fittings and Stainless Steel Clamps). Also compatible with Push-Fit connection system (such as SharkBite), Viega Press type system and Compression type PEX fittings.

This product is a replacement for:

Watts (RadiantPEX): PB032121-300

Viega (ViegaPEX): 11457

Nibco (DuraPEX): PX50035 (note that DuraPEX is PEX-C tubing)

Zurn (ZurnPEX): QHR4PC300X

PEX Tubing colors and packaging may vary by manufacturer.

Documentation:

Technical Specifications and General Installation Recommendations

Technical Specifications for PEX Tubing w/ Oxygen Barrier

3/4" PEX Tubing with Oxygen Barrier is the most popular size for all snow melt projects. According to RPA Standard Guidelines, 500ft is the recommended circuit length for the 3/4" Oxygen Barrier PEX Tubing, when used for radiant floor heating applications. For snow melt applications, 300ft length is considered more appropriate.