Electronic Water Feeder (120V)

Taco EWF120-1 Water Feeder works together with Low Water Cutoff to feed the water into the system whenever a "low water" condition is detected.

Taco Water Feeder is programmable, so it can feed the water "on-demand", when Low Water Cutoff detects a "low water" condition or feed a pre-determined amount.

Other features include Delays Before Feeding (allows the user to set delays before feeding) and a Hold After Water OK (once the low water cutoff signals water level is restored).

Programmable Excess Feed indicator alerts the owner if the amount of water (in gallons) fed into the system exceeds the pre-set value.

Taco EWF120-1 specifications:

Input Supply Voltage: 120 VAC;
Power Consumption: 12VA (During Feed Only);
Max. Inlet Water Pressure: 150 PSI;
Max. Outlet (Boiler) Steam Pressure: 15 PSI;
Max. Water Temperature: 160°F;
Max. Ambient Temperature: 100°F;
Feed Rate: 1 GPM;

Dimensions: 4.41" Wide x 5.75" Long x 5.12" High (w/ Valve);

Other features:

Field Adjustable Control
Three Feed Options: LWCO Mode, Fixed Feed, or Manual Feed;
Manual Feed Button;
Internal Excess Feed Reset Button;
Multi-Colored External Indicator Light;
DIP Switch Mode Settings Control: Delay Before Feed, Excess Feed, Selectable Feed & Hold After Water OK;
Flood Protection Lockout;
Underfeed Protection;
UL Approved;
3/8”NPT to 1⁄2” Copper Fittings Included;
Integral Valve Strainer;
Universal Low Water Cutoff Compatibility;