1-1/4" Threaded Vortech Air Separator

Taco

Brand: Taco

Mfr Part#: VRTX125-3

UPC#: 687752202199

Availability: In Stock
Usually ships: within 1 business day
Qty Price
$104.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs (2)

Taco VRTX125 VorTech Air Separator features 1-1/4" threaded inlets, cast iron body and is designed to provide an enhanced level of air removal in a large variety of hydronic, radiant heating, cooling or combination systems. Air is quickly and effectively separated and eliminated through a factory installed Taco Hy-Vent.

Taco VorTech air separator is also designed with a 1/2" tapping at the bottom for easy installation of an expansion tank.


Features:

  • Works Efficiently with both Low Velocity Water and High Velocity Water;
  • Unique Bubble Breaker Cartridge;
  • Replaceable High Capacity Hy-Vent;
  • No Minimum Run of Pipe Required;
  • Vent can be Closed;
  • Eliminates Air Induced System Noise;

Technical Specifications:

  • Inlet/Outlet Connections: 1-1/4" Female Threaded;
  • Expansion Tank Outlet (bottom tapping): 1/2" Female Threaded;
  • Maximum Operating Pressure: 150 psi;
  • Maximum Operating Temperature: 240°F;
  • Media: Water or Water/Glycol;
  • Recommended Velocity: 4 feet/sec;
  • Maximum Velocity: 8 feet/sec;
  • Cv: 21.4;
  • Kv: 17.0;
  • Dimensions: 5-3/4" wide x 7-5/8" high x 3" deep;
  • Weight: 7.0 lbs;
  • Materials of Construction: Cast Iron Body and Cap; Stainless Steel Cartridge and Plate; Viton O-Ring; Taco 419 Hy-Vent Air Vent;

Warranty:

1 year manufacturer's warranty.
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The Hy-Vent on my 125-3 Vortech Air separator is leaking fluid. Should the screw cap be left tightened or loose to prevent this from happening?
Read 1 answer
The screw cap should always be loose to allow the air to escape. If the Hy-Vent is leaking it may need to be replaced.
Answered on 5/20/2013 by PexUniverse Customer Service
Was this answer helpful?  Yes / No
Does the Vortech Air Separator need to be installed on the return or supply line?
Read 1 answer
Typical installation is on the supply line in conjunction with an expansion tank as shown in the manual.
Answered on 2/19/2013 by PexUniverse Customer Service
Was this answer helpful?  Yes / No
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):