#8 Grease Trap, 4 GPM, 8 lbs, 2" no-hub inlet/outlet
Mfr Part#: GT2700-4-2NH
The Zurn GT2700 Grease Trap is designed to remove grease from food preparation areas, such as kitchens and restaurants. This grease trap is covered in fabricated steel so it is impervious to corrosion. The Zurn Grease Trap should be installed as close as possible to the fixture, and with enough space to provide easy access to the cover for cleaning. Grease traps need to be regularly cleaned, as the rate at which grease is removed depends on the quantity of grease in the waste water, and the trap
Does the trap have to be vented to perform? Can it just be installed be connecting the trap to the inlet and outlet pipe?
Read 1 answer
Zurn grease traps do no require venting. You would simply install the grease trap in an accessible location and connect the inlet/outlet piping. Refer to page 2 of the installation manual in the "Literature" tab of this page for a schematic.
Answered on 5/20/2013 by PexUniverse Customer Service