The Liberty Pump FL204M is a manual submersible effluent sump pump with a 2HP, 440-4800V, 3 Phase motor enclosed in heavy-cast iron construction. The Liberty FL204M is intended to be run using an approved liquid level control or approved motor control with correct rating that matches motor input in full load amperes. Regardless of the control type, be sure that when this effluent sump pump shuts off, at least 3-1/2" of fluid is left in the basin so the impeller remains submerged. The Liberty FL204M submersible sump/effluent pump has a dual sized discharge of 1-1/2" FNPT and 2" FNPT for connection to either size pipe. This effluent sump pump can also handle solids up to 3/4" and has a shut-off head of 130'. These Liberty effluent pumps were designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications.
The Liberty FL204M is built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners. 3-phase models require a control panel for automatic operation. See simplex and duplex panel literature for complete information. Check three phase effluent sump pumps for proper rotation prior to installing pump(s) in basin. To change rotation, reverse any two of the three power leads to the pump. Code the wires for reconnection after installation.