16S-CIM Manual Sewage Pump w/ 20' cord, 1 HP, 200/208V
Brand: Little Giant
Part#: 514625
Model: 16S-CIM
Usually ships: within 3-4 business days

Little Giant 16S-CIM (514625) is a Manual Submersible Sewage Ejector Pump 1 HP, 200-208V, 20' power cord - Dominator 16S Series, recommended for use in sumps, basins or lift stations and is suitable for pumping sewage, effluent, wastewater and other non-explosive, non-corrosive liquids with a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

16S-CIM Dominator submersible Sewage Ejector Pump features a vertical 3" FNPT discharge with head capacity of 35' and ABS base. The 16S Series Pump was specifically engineered to handle liquids and up to 2" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant 16S-CIM has an epoxy coated heavy-duty cast iron housing and volute, to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life. Little Giant 16S-CIM boasts dynamically balanced two-vane non-clogging epoxy coated cast iron impeller with pump-out vanes for enhance pumping performance and efficiency, maximum 140F operating temperature, secondary exclusion seal, mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic shaft seal) and 300 Series stainless steel hardware. Oil filled motor housing of 16S-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 1 HP, single phase induction 1625 RPM motor with automatic reset thermal overload protection delivers 160 GPM of wastewater at 10' total dynamic head. This newest 16S-CIM Submersible Sewage Ejector Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.

  • 1 HP (ball bearing) permanent split capacitor motor with overload protection
  • Handles liquids and solid waste materials up to 2" diameter
  • 3" FNPT discharge
  • Cast iron housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • Stainless steel screws, bolts and lifting ring
  • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability
  • Secondary exclusion seal to help protect mechanical seal
  • Thermal overload protection
  • Capacitor & power cord isolated from oil-filled motor housing for ease of field maintenance
  • Dynamically balanced two-vane non-clogging impeller with pump-out vanes to protect seal
  • UL listed
Read more

Technical Specifications:
  • Motor: 1 HP Permanent Split Capacitor
  • Maximum flow rate: 160 GPM @ 10'
  • Maximum Head: 35'
  • Solids handling (dia.): 2"
  • Max Liquid Temp: 140F
  • Discharge: 3" FNPT
  • Cord Length: 20'
  • Voltage: 200-208 V
  • Hertz: 60 Hz
  • Amps: 11 A
  • Watts: 2000 W
  • Weight: 88 lbs.
  • Height: 17.2"
  • Width: 9.9"
  • Length: 14.1"
Read more

2 years manufacturers warranty from the date of purchase.
Write a Review
Helpful? Yes {{ (2*reviews[i].feedback_helpful) - reviews[i].feedback_count }} No
Verified Purchase
{{ reviews[i].content.title }}
Reply from PexUniverse:
By {{ reviews[i].content.name }} (from {{ reviews[i].content.location }}) on {{ reviews[i].updated_at | formatDate }}
Ask a Question
{{ f.question }}
Helpful? Yes {{ (2*f.feedback_helpful) - f.feedback_count }} No
By PexUniverse Customer Service on {{ f.answered | formatDate }}

Related products

Recently viewed products