The Senphus 6FHC-460 Electric Radiant Floor Heating Cable is designed to be an easy-to-install, economical way to warm an indoor floor. These cables can be placed in bathrooms, kitchens, as well as living areas. These cables are not designed for exterior or snow-melting applications, or for ceiling installation. To install, simply fasten the cables to the floor, add a layer of mortar, and lay the floor covering.
Senphus 6FHC-460 Floor Heating Cables are designed to run at 120V, and are 459.2 ft long. These Cables radiate heat approximately 2” on either side of the cable, which makes consistent coverage significant. However, the attainable floor temperature ultimately depends on the floor’s insulation, and in the case of uninsulated slab applications, on the thermal drain of the underlying materials.
Senphus Electric Radiant Floor Heating Cables can also be used to heat a room, if the room’s heat loss falls within the mat’s heating parameters. However, they are not intended for this purpose.
CAUTION: Do not install Electric Radiant Floor Heating Cables in confined areas where excessive heat can accumulate, such as underneath cabinets, fixtures within a wall, or small closets.