4ft long x 5" wide, 1/2" PEX Aluminum Heat Transfer Plates (50/box), Omega-Shaped, Made in USA
4ft long Heat Transfer Plates are manufactured from stamped aluminum and are 5" wide.
Nominal thickness of these plates is 0.018".
Compatible with 1/2" PEX or PEX-AL-PEX tubing (5/8" OD).
Can be used for under the subfloor (staple-up) or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, effectively reducing the heating bills.
Recommended spacing for parallel tubing runs is 8" OC. Edges of the plates should not touch each other or intersect.
Omega-shaped heat transfer plates by Everhot provide superior heat distribution when compared to plates with U- or V-shaped channel and are manufactured in the USA.
4ft long x 5" wide, 1/2" PEX Aluminum Heat Transfer Plates (50/box), Omega-Shaped, Made in USA has an average 5 rating out of based on 3 user reviews.
These plates are a good weight and the PEX snaps in securely. I had some challenges with the PEX tubing as it was in a cold area and quite stiff but once I was able to flatten it and snap it in the plates it stayed in place pretty well.
So easy to install radiant in crawl space.
works as expected
Fit on aluminums core pex