1/2" PEX Crimp Tool (Angle Head)

1/2 PEX Crimp Tool by Everhot
Click on image to enlarge
1/2 PEX Crimp Tool by Everhot angle view





Availability: In Stock
Usually ships: within 1 business day
Qty Price
$55.95 / each + Free Shipping
Add to cart McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
  • Description
  • Reviews
  • FAQs

PEX Crimp tool for use with 1/2" PEX tubing, fittings and copper crimp rings. Includes a 1/2" PEX go-no-go gauge tool. This model is well suited for PEX installation in confined spaces. Overall length is 10.5".


Fittings: Crimp style brass and poly PEX fittings manufactured to ASTM F1807 (Everhot, Nibco, Watts, Zurn, etc.)
Rings: Copper crimp rings per ASTM F1807 (Sioux Chief, Watts, etc.)


Tutorial: "How To Make a Crimp Connection"

Average 4.0 rating based on 1 review.
1/2" PEX Crimp Tool
By Arthur S. Beach (from Walterboro, SC) on 7/5/2013
Review for: 1/2" PEX Crimp Tool (Angle Head)
It does not have instructions should guage indicator require adjustment to crimp jaws. It appears to be able to crimp rings as advertized. therefore I would give this tool an acceptable rating.
Indicate an email address where you wish to receive the answer to your question.
Enter the characters (without spaces) shown in the image.
It appears that there is the ability to make adjustments on this tool [ between #0 thru #5]. The tool was shipped set on #1, when and under what circumstances, will it require adjustment?
Read 1 answer
The crimp tool may require periodic calibration when constantly in use. The Go-No-Go gauge supplied with the kit is used to check whether the connection was done properly. When the gauge is a No-Go, you adjust the dial and check the connection again and repeat the process if needed until it's a "Go".
Answered on 2/19/2013 by PexUniverse Customer Service
I was wondering about the operation of this tool. Is it the style that opens up by pulling down on the back handle (linkage inside of too allows for minimum handle spread). Or do the handles swing apart to open the jaw.
Read 1 answer
It is the former one.
Answered on 2/11/2013 by PexUniverse Customer Service
Can these be used as 1-handed pex crimpers?
Read 1 answer
No, this tool has to be operated using both hands. Due to the nature of the connection method, there are really no 1-hand crimpers available. The only 1-hand style PEX tool (and it's for cinch rings) we have is Everhot PXT3011.
Answered on 9/24/2012 by PexUniverse Customer Service

The following was added to your shopping cart: X

Forgot Your Password?

Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.