1" x 100ft PEX Plumbing Tubing, Non-Barrier (Blue)
100ft roll of 1" PEX plumbing tubing (non-barrier PEX tubing) for use in residential plumbing applications.
Manufactured to ASTM F876/F877/F2023 and CSA B137.5 standards, certified for use in potable water applications. Backed by a 25 year manufacturer's warranty. UPC listed by IAPMO.
Pressure ratings: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F
1" Non-barrier PEX tubing is commonly used for water mains in residential and light commercial plumbing applications.
Everhot 1" PEX Tubing is PEX-B tubing and can be installed using either Crimp type connection system (Crimp Tool, Crimp-style PEX Fittings and Copper Crimp Rings) or Clamp/Cinch type connection system (Clamp Tool, Crimp-style PEX Fittings and Stainless Steel Clamps). Also compatible with Push-Fit connection system (such as SharkBite), Viega Press type system and Compression type PEX fittings.
Viega (ViegaPEX): 32061 (White)
Watts (WaterPEX): WPTC16-100W (White)
Nibco (DuraPEX): PX40142 (note that DuraPEX is PEX-C tubing)
Zurn (ZurnPEX): Q5PC100XBLUE
1" x 100ft PEX Plumbing Tubing, Non-Barrier (Blue) has an average 5 rating out of based on 1 user review.
I would buy this product again
This stuff has incredible memory from the coiling process, I assume while it was still warm coming out of the extruder. It will help to have an assistant to keep control of the coil while you route it through the planned path.It also takes a fair amount of muscle and finesse to straighten it without kinking or collapsing it.
Can 1" pex be used to extend a steam system from a second floor to a third floor addition if the boiler is in the basement?
Read 1 answer
PEX is not intended for use with steam. It can be used for hot water applications not exceeding 180F temperature.
Answered on 3/15/2016 by PexUniverse Customer Service
Can it be used underground from meter to house?
Read 1 answer
Yes. When used for underground applications, PEX must be buried below the ground freezing level (frost line) and properly insulated and protected from abrasives. Frost line in the lower 48 states can be anywhere from 8ft (northernmost states) or less based on your actual location. For insulation, pipe can either be wrapped in bubble type or slip type foam pipe insulation and encased in a larger diameter corrugated pipe.
Answered on 11/2/2015 by PexUniverse Customer Service