1/2" PEX Stainless Steel Cinch Clamps SSC (100/bag)

Oetiker

Brand: Oetiker

Mfr Part#: 16703335

Availability: In Stock
Usually ships: within 1 business day
Qty Price
x1
$18.95 / each
x5 $89.75 / box
(5 x $17.95 / each)
  • Description
  • Reviews (5)
  • FAQs (2)

Oetiker brand 1/2" Stainless Steel Clamps are for use with a PEX Clamp (Cinch) Tool, 1/2" PEX tubing and 1/2" crimp style PEX fittings.

All Oetiker PEX clamps are made in the USA, manufactured in accordance with ASTM standard F2098 for PEX stainless steel clamps and are the only PEX cinch clamps which are NSF certified.

1/2" PEX Stainless Steel Cinch Clamps SSC (100/bag) has an average 4.8 out of 5 rating based on 5 user reviews.
 
Worked Perfectly Every Time
By BoylermanCT (from Barkhamsted, CT) on 10/29/2016
Replaced 6 outside faucets and ran new PEX to them. Used these stainless steel clamps for the first time. 100% success, 0% failure rate. Would recommend.
Was this review helpful?  Yes / No
 
1/2" PEX Stainless Steel Cinch Clamps SS
By Frank (from Columbus, OH) on 7/11/2011
"I didn't think I'd ever need 100 of these crimps, as I just wanted to make a small repair. However, now that I have the crimp tool and the crimps, I'm using them a lot! The only thing I can think of for a product improvement is to make them a little bit easier to remove."
Was this review helpful?  Yes / No
 
Good Product, [...]
By garys77 (from LI NY) on 6/15/2011
The Oetiker clamps work well with the Pex tubing. A little tough to remove so plan accordingly. [...]
Was this review helpful?  Yes / No
 
High quality and affordable
By jadinolfi (from Ocklawaha, FL) on 6/1/2011
These crimps are a perfect match to the crimper. Very easy to use.
Was this review helpful?  Yes / No
0 of 1 people found this review helpful.
 
1/2" PEX Stainless Steel Cinch Clamps
By Melvin C. (from St Louis Mo) on 12/26/2011
Use on pex
Was this review helpful?  Yes / No
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
will these clamps work with a zurn pex quickclamp ratcheting crimp tool model QCRTQCRM ?
Read 1 answer
1 of 1 people found this answer helpful.
Yes. Also, we have the same tool at a much lower price - model PXT3011 by Everhot.
Answered on 3/27/2015 by PexUniverse Customer Service
Was this answer helpful?  Yes / No
what is the best way to remove the ss cinch crimp clamp i have one leaking after installing it.
Read 1 answer
2 of 2 people found this answer helpful.
An installed PEX cinch clamp can be removed by cutting off the cinch head with wire cutters and prying the ring off with a flat screwdriver.
Answered on 4/3/2013 by PexUniverse Customer Service
Was this answer helpful?  Yes / No
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):
X

Free pickup available for all "In-Stock" items!


Order now and we'll have your order ready in 1 hour or less.

Pickup window: 11:00am to 4:00pm, Monday through Friday

Location: 5407 Foster Ave, Brooklyn, NY 11234