6-port Copper Manifold with 1/2" PEX Valves, 3/4" PEX x Open
Brand: Sioux Chief
Part#: 672XV0699
In Stock
Usually ships: within 1 business days

Copper manifold by Sioux Chief with crimp style, 1/4-turn shut-off brass ball valves and crimp style PEX inlet/outlet connections.

  • Lead-free
  • Type L copper trunk body
  • Shut-off valves made from lead-free brass
  • Compatible with crimp ring or cinch clamp PEX connection systems
  • cUPC listed
  • Made in the USA
Read more

Technical Specifications:
  • Trunk inlet: 3/4" PEX, crimp-style
  • Trunk outlet: 3/4" PEX, crimp-style
  • Trunk size (diameter): 1" copper pipe (CTS)
  • Branches: 1/2" PEX (1/4-turn ball valves)
  • Number of branches: 6
  • Branch spacing: 2" OC (On Center)
  • Overall size (L x H): 17" x 4.5"
Read more
Write a Review
Helpful? Yes 5 No
Verified Purchase
Very impressive.
I was not sure what to expect when I ordered these. My local stores do not carry this style of manifold (with the built in valves). They appear quite well made and sturdy. Pressured up the mainfold(s) with no leaks, valves all work as expected.
By Verified Buyer (from Oregon) on 01/29/2016
Helpful? Yes 4 No
Installed 2 years ago
Great product. I installed it two years ago and haven't had a problem yet. It seems well built. I suspect it will last a lifetime.
By Daniel R. (from Burnsville, NC) on 03/21/2013
Ask a Question
I bought the manifold with open ends by mistake. I would like to just close off one end. What's a good way to do this, and will it affect the performance of the manifold? I bought two of these, one for cold, and one for hot, and would like to close one end of each. Thanks very much in advance, Hank.
Helpful? Yes 2 No
You can put a short piece of 3/4" PEX pipe with a plug at one of the ends to cap it. This will not affect manifold's performance.
By PexUniverse Customer Service on 05/20/2013
The open end manifold can be feed from both ends to help reduce pressure differences or am I missing the reason for the open end. I am replumbing my house(I have Quest) and will install several manifolds with "home runs" back to a central location. I have a well
Helpful? Yes 1 No
The open end of the manifold simply allows you to run the PEX line further. It does not serve a pressure balancing purposes and operates in the same manner in both well water and municipal water systems.
By PexUniverse Customer Service on 12/10/2013
Can this manifold be used with expansion (Uponor) connections.
Helpful? Yes No
No. The outlets are crimp style and are installed using crimp method only. However, the crimp connection is compatible with all types of PEX (A, B & C).
By PexUniverse Customer Service on 01/25/2017

Related products