MF200 PressurePal Hydronic System Mini Feeder, 6 gallon

Axiom

Brand: Axiom

Mfr Part#: MF200

Availability: In Stock
Usually ships: Today, if ordered by 3pm
Qty Price
$530.95 / each & Free Shipping
  • Description
  • Literature
  • Reviews
  • FAQs

MF200 PressurePal feeder (6.0 gal) is ideal for feeding and pressurizing closed-loop heating systems with operating pressure of 25 psi and below. It allows for installation of stand-alone hydronic heating, radiant heating, snow/ice melting systems and forced air coil heat exchangers - without the need for running a separate potable water supply line. Axiom hydronic feeders are compatible with water and up to 50% water/glycol mix solutions and plug directly into a US standard electrical wall outlet - no special wiring or control boxes needed. MF200 is easy to install & service, saves time & labor and helps to prevent major flooding caused by leaks and ruptured pipes.


Features:

  • Compatible with water & glycol (anti-freeze) mixes;
  • Perfect for stand-alone hydronic and radiant heating, snow melting and heating/cooling coils;
  • Plugs directly into a standard 115VAC outlet;
  • No need for piping to a potable water supply - no need for backflow preventer;
  • Built-in diaphragm pump can run dry without damage;
  • Make-up fluid stored in the feeder tank can be pre-treated;
  • Diverter valve allows for easy purging of air on start-up and manual agitation of solution;
  • Major flood prevention - in the event of leakage or system rupture, only the tank contents will be pumped into the system;
  • Early leak detection - dropping fluid level indicate that the system has developed a leak;
  • Fluid drained for service can easily be re-used (put back into the system);
  • Fluid level switch shuts the pump off if fluid level in the tank gets too low;
  • Auxiliary dry contacts for (optional) low-level alarm installation.

Technical Specifications:

  • Pressure switch range: 10-25 psig (70-170 kPa) - adjustable, factory set to 15 psig;
  • Tank volume: 6.0 gallons (22.7 liters);
  • System connection: 1/2" FPT;
  • Electrical: 115V, 60Hz, US standard 3-prong plug;
  • Weight: 7.0 lbs (when empty) or 60.0 lbs (when full);
  • Dimensions (L x W x H): 11.75" (300mm) x 11.75" (300mm) x 16" (400mm);
  • Pump performance: up to 0.7 GPM @ free flow, self-priming up to 4ft (1.2m);
  • Max. glycol concentration: 50%.
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Image CAPTCHA
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×
X

Forgot Your Password?


Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.

X

Estimate Delivery Date & Cost


Ship to Zip Code:
Qty (Optional):