Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35' cord, 1/3 HP, 115V
Brand: Liberty Pumps
Part#: 253-3
Usually ships: within 5-7 business days

The Liberty Pump 253-3 is an automatic, submersible effluent/sump pump that comes with a 35-ft. power cord and has a shut-off head of 23'. It has a 1-1/2" discharge and can handle solids up to 1/2". This Liberty effluent/sump pump also has a 1/3HP motor that can produce a flow rate of 36 GPM at 10' and includes a wide-angle float switch. This switch has an "ON" level at 11" and "OFF" level at 4.2" and features a piggy-back plug allowing for manual operation. This effluent sump pump is ideal for pumping of drainage, effluent and waste water and other non-explosive/corrosive liquids.

The Liberty 253-3 effluent sump pump operates at 115V, 5.2 Amp and 60 Hz with a maximum fluid temperature of 140F. This Liberty sump/effluent pump is the perfect choice for low-head effluent pumping or basement de-watering applications, as well as liquid waste transfer for residential or commercial applications that require more flow at low-head. The powerful heavy-duty motor on the Liberty 253-3 effluent sump pump comes with a rugged housing and powder coat finish that is completely submersible and will provide years of reliable performance.


Features:
  • Vortex style impeller permitting passage of solids up to 3/4"
  • Cast bronze or cast iron pump housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • 1/3 HP shaded pole motor with thermal overload protection
  • Stainless steel fasteners
  • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for protection against pump failure
  • Upper and lower sintered sleeve bearings for extended motor life
  • Automatic operation with piggyback mechanical float switch with "ON" level at 11" and "OFF" level at 4.2"
 
Read more

Technical Specifications:
  • Discharge Size: 1 1/2" FNPT
  • Solids Handling Capability: 1/2" dia.
  • Listing: UL/CSA
  • HP: 1/3
  • Volts: 115
  • Phase: 1
  • Hertz: 60
  • Amps: 5.2
  • Flow @ 5': 45 GPM
  • Flow @ 10': 38 GPM
  • Flow @ 20': 14 GPM
  • Thermal overload temp: 248F
  • Shut-off Head: 23'
  • Cord Length: 35'
  • Height: 10.5"
  • Major Width: 9.6"
  • Weight: 24 lbs
 
Read more

Warranty:
3 years manufacturer's warranty
Write a Review
Helpful? Yes {{ (2*r.feedback_helpful) - r.feedback_count }} No
Verified Purchase
{{ r.content.title }}
Reply from PexUniverse:
{{ r.group_identifier }}
By {{ r.content.name }} (from {{ r.content.location }}) on {{ r.updated_at | formatDate }}
Ask a Question
{{ f.question }}
Helpful? Yes {{ (2*f.feedback_helpful) - f.feedback_count }} No
By PexUniverse Customer Service on {{ f.answered | formatDate }}

Recently viewed products

Top