Liberty Pumps LE102A2-2 Sewage Pump Performance Curve 1HP
Liberty Pumps LE102A2-2 Submersible Sewage Pump 1HP

Automatic Sewage Pump w/ Wide Angle Float Switch, 25' cord, 1 HP, 208/230V

Liberty Pumps

Brand: Liberty Pumps

Mfr Part#: LE102A2-2

UPC#: 671812101409

Usually ships: within 5-7 business days
Qty Price
$648.20 / each & Free Shipping
Add to card Add to cart
  • Description
  • Literature
  • Reviews (1)
  • FAQs

The Liberty LE102A2-2 Pump is a 230V, 1HP automatic submersible Sewage Pump with a 25' quick disconnect power cord. The Liberty LE102A2-2 has a 2" NPT flanged discharge and a wide-angle float switch with a piggy-back plug for manual operation. This switch has a turn-on level of approximately 12" to 16" and a turn-off level of 6' above the bottom of the basin. Other pumping differentials may be obtained by tethering the switch cord to the discharge pipe on this Liberty sewage pump.


The Liberty submersible sewage pump features 2-vane, semi-open impellers that allow passage of 2" solids and has a shut-off head of 36'. This Liberty sewage pump is constructed of heavy cast iron with a tough epoxy powder coat finish and stainless steel fasteners for years of trouble-free performance.


  • Rugged 2 vane, semi-open cast iron impellers;
  • Cast iron housings and volute with all stainless and brass fasteners;
  • 416 stainless steel rotor shaft;
  • Oil-filled, hermetically sealed motors;
  • Built-in thermal protection on single phase models;
  • Permanently lubricated upper and lower ball bearings;
  • Unitized shaft seals;
  • Single float mechanical level control with series plug for manual bypass operation-standard on single-phase automatic models;
  • Adjustable pumping range;
  • Quick-disconnect 25' standard power cord allows replacement of cord in seconds without breaking seals to motor;

Technical Specifications:

  • Horsepower: 1HP;
  • Cord length: 25';
  • Discharge: 2" FNPT Flanged;
  • Solids Handling: up to 2";
  • Shut-off Head: 36';
  • Voltage: 208-230V;
  • Amps: 8;
  • Hertz: 60 Hz;
  • Phase: 1;
  • RPM: 1725;
  • Maximum fluid temperature: 140°F;
  • Height: 14.1";
  • Width: 12.6";
  • Weight: 64 lbs.;
  • Minimum basin diameter: 18";
  • Minimum basin depth: 24";


3 years manufacturer's warranty
Automatic Sewage Pump w/ Wide Angle Float Switch, 25' cord, 1 HP, 208/230V has an average 5.0 out of 5 rating based on 1 user review.
Plenty of power to move sewage uphill 200' (20'+ vertical)
By DIY Plumber (from Raleigh, NC) on 4/30/2016
Heavy duty, well built, and outperforms my last pump. It takes 3 minutes to pump approx 50 cu ft of sewage up a 24' vertical distance out of my tank. My last pump took 2 hrs (undersized obviously). Will pay for itself over time in energy savings compared to last pump. Smart move on my part.
Was this review helpful?  Yes / No
Indicate an email address where you wish to receive the answer to your question.
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×

Forgot Your Password?

Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.


Estimate Delivery Date & Cost

Ship to Zip Code:
Qty (Optional):