3/4" x 500ft PEX Plumbing Tubing, Non-Barrier (Red)
Brand: Everhot
Part#: NPR3450
In Stock
Usually ships: within 1 business days

500ft roll of 3/4" PEX plumbing tubing (non-barrier PEX tubing) for use in residential plumbing applications.

Manufactured to ASTM F876/F877/F2023 and CSA B137.5 standards, certified for use in potable water applications. Backed by a 25 year manufacturer's warranty. UPC listed by IAPMO.
Pressure ratings: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F
Packing: Box; Dimensions (L x W x H): 33" x 33" x 10"; Weight: 60.0 lbs


Everhot PEX Plumbing Tubing (Non-Barrier):

  • Is manufactured to ASTM F876/F877, AWWA C904 & CSA B137.5 standards.
  • Tested and Certified by NSF for potable water applications and complies with NSF/ANSI 61 standard.
  • Lead-Free Certified by NSF, complies with NSF/ANSI 372 (nsf-pw-g) standard and SDWA guidelines, lead-free compliant for all of the USA.
  • NSF¬†Certified to the Uniform Plumbing Code (UPC).
  • Meets chlorine resistance requirements when tested in accordance with ASTM F2023.

Applications:

3/4" non-barrier PEX tubing can be used for residential and light commercial hot/could water plumbing applications.


Compatibility:

Everhot 3/4" PEX Tubing is PEX-B tubing and can be installed using either Crimp type connection system (Crimp Tool, Crimp-style PEX Fittings and Copper Crimp Rings) or Clamp/Cinch type connection system (Clamp Tool, Crimp-style PEX Fittings and Stainless Steel Clamps). Also compatible with Push-Fit connection system (such as SharkBite), Viega Press type system and Compression type PEX fittings.


Cross-References:
  • Viega (ViegaPEX): 32145
  • Watts (WaterPEX): WPTC12-500R
  • Zurn (ZurnPEX): Q4PC500XRED
Ask a Question
I have a very old home 100 plus years old lines to the radiators are in very bad shape and rusted and not safe can Pex be used for this instead of copper ? I need to replace every one and just the time saved and not including the money saved would be welcome news
Helpful? Yes No
You can certainly use PEX to replace copper, but in closed loop heating applications oxygen barrier PEX should be used instead of the non-barrier. Otherwise, the installation would be the same as with regular pipes. Once old piping is removed, the same holes can be used to route the PEX pipe. When spacing allows, you can also use bend supports instead of elbows to reduce pressure drop and number of connections. Furthermore, if your heating system water does not mix with potable water, you can use regular brass PEX fittings (not the lead-free version) or poly PEX fittings, which will also help to offset the installation cost.
By PexUniverse Customer Service on 10/05/2015

Related products

Top