Lead-free PEX copper manifold by Sioux Chief with crimp style, 1/4-turn shut-off PEX brass ball valves. Can be used as primary or secondary manifold and in combination with other models and mounting hardware (such as MPB57), can be used for building a DIY home run system which is less complex, more reliable and more versatile.
- No lead (Lead-free)
- Trunk made from type L copper
- Shut-off valves made from lead-free brass
- Compatible with crimp ring or cinch clamp PEX connection systems
- cUPC listed
- Made in the USA
- Trunk inlet: 3/4" PEX, crimp-style
- Trunk outlet: spin closed
- Trunk size (diameter): 1" copper pipe (CTS)
- Branches: 1/2" PEX (1/4-turn ball valves)
- Number of branches: 4
- Branch spacing: 2" OC (On Center)
- Overall size (L x H): 11-1/4" x 4.5"
Write a Review
Well made and easy to install. Having a copper manifold with the valves attached was a big time saver. Wish I could buy them with more than 6 outlets. I highly recommend for a house retro fit.
Verified PurchaseWorked Great
Great product, easy install with PEX crimp. Had no problems fitting the crimper tool between the shutoff valves. No leaks, everything seems to be good quality. I like the ability of shutting off single fixtures or areas of the house.
Verified Purchase4-port Copper Manifold, 1/2" PEX
Excellent quality, made running the lines to different sections a breeze. Its nice to be able to isolate individual drops when needed.
Verified PurchaseVery sturdy construction.
I was not sure what to expect when I ordered these. My local stores do not carry this style of manifold (with the built in valves). They appear quite well made and sturdy. Pressured up the manifold(s) with no leaks, valves all work as expected. I used three of these, it would have been nice to have them in left and right closed end options.
Verified PurchaseDid the job!
Nice product. Worked as you would expect!
Verified PurchaseGreat Product
Worked well the first time. Solid Valves. No complaints.
Verified PurchaseVery Satisfied
I was surprised at how solidly constructed this unit is. It works perfectly-the valves provide a solid shut off and good flow through
Ask a Question
Can the valves be rotated 180*? I will be connecting it to a 3/4" line flowing down, and want the 1/2" lines branching to the left.
These valves are permanently soldered and cannot be rotated. Sioux Chef does not offer this specific version in the configuration you specified, however, there's a model which can be slightly modified to fit your specific needs: 672XV0499 - cut off the left manifold inlet and solder a 1" copper cap (part# P-5) over it.
By PexUniverse Customer Service on 08/29/2016
Is this product available in a right side inlet (branches oriented up) version?
Not this particular model. A similar model 672XV0442 have both sides open and can be adapted to a right-side inlet with PEX adapters and copper caps.
By PexUniverse Customer Service on 03/14/2016