Liberty Pumps HT41M-2 High Temperature Sump Pump 4/10HP, 115V, 200F
Liberty Pumps HT41M-2 High Temperature Sump Pump 4/10HP, 115V, 200F

Manual High Temperature Sump Pump (200F), 25' cord, 4/10 HP, 115V

Liberty Pumps

Brand: Liberty Pumps

Mfr Part#: HT41M-2

UPC#: 671812103540

Usually ships: within 5-7 business days
Qty Price
$333.90 / each & Free Shipping
Add to card Add to cart
  • Description
  • Literature
  • Reviews
  • FAQs

The Liberty HT41M-2 Pump is a 4/10HP, high temperature, manual submersible sump pump. This Liberty sump pump comes with a 25-ft. power cord and can handle liquid temperatures up to 200 degrees F. This high temperature, manual submersible sump pump can handle solids up 3/4" and has a 1-1/2" FNPT discharge. It is a manual sump pump and has no switch. This sump pump has a shut-off head of 16' at 200F water temperature and 20' at 77F.


The Liberty HT41M-2 high temperature sump pumps can a reach a maximum flow of 59 GPM. The Liberty HT41M-2 sump pump is designed for hot-water applications, such as boiler blow-down pits, condensate pits and high temperature water transfer. This Liberty sump pump also has cast iron construction with all stainless and brass fasteners, and a stainless steel rotor shaft that provides ultimate performance and reliability.


  • Vortex impeller, made of high temperature engineered thermoplastic, permits passage of solids without clogging;
  • Cast iron construction with all stainless and brass fasteners;
  • 416 stainless steel rotor shaft;
  • Oil-filled, thermally protected motor;
  • Permanently lubricated bearings;
  • Unitized shaft seal;
  • 25' U.L. approved power cord with quick disconnect design;
  • 1-1/2" FNPT discharge;

Technical Specifications:

  • Horsepower: 4/10 HP;
  • Automatic: No;
  • Discharge: 1 1/2" FNPT;
  • Solids Handling: 3/4";
  • Voltage: 115V;
  • Phase: 1;
  • Full load amps: 12;
  • Locked rotor amps: 23;
  • Thermal overload temp: 302F;
  • Stator winding class: F;
  • Cord lenth: 25';
  • Weight: 38 lbs;
  • Height: 9.6";
  • Major Width: 9.8";
  • Maximum fluid temperature: 200F;


3 years manufacturer's warranty
No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
The following was added to your shopping cart: ×

Forgot Your Password?

Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.


Estimate Delivery Date & Cost

Ship to Zip Code:
Qty (Optional):