www.pexuniverse.com PexUniverse - PEX, Plumbing, Heating, HVAC Supplies Industrial equipment supplier in Brooklyn, New York
1 HP JP-100-C Shallow Well Jet Pump, 115V/230V, Cast Iron
Brand: Little Giant
Part#: 558276
Model: JP-100-C
This product has been discontinued. No direct replacement is available at this time.

Little Giant JP-100-C (558276) is a Shallow Well Jet Pump with Square D pressure switch, 1 HP, Dual Voltage 115/230 Volt, 60 Hz - JP Series, is recommended for supplying fresh water to rural homes, farms and cabins from a shallow well, suitable for installs where the vertical distance from the pump to the pumping water level does not exceed 25'.

Little Giant JP-100-C features a 1" NPT discharge with head capacity of 153' and brass flow control valve. The New Jet Pump with a 1 1/4" Suction NPT was specifically engineered to handle water transfer with high efficiency and long term dependability. Little Giant JP-100-C boasts rugged cast iron construction and precision engineered thermoplastic impeller, diffuser, nozzle and venturi for high performance and efficient water flow. Powerful O. Smith 1 HP, dual compartment motor, delivers 25 GPM of fluids at 50' (20 PSI with 5' suction lift) and has a higher than NEMA service factor. JP-100-C Shallow Well Jet Pump features a pressure gage, factory pre-set 30/50 pressure switch which produces up to 50 PSI with automatic shut-off and a stainless steel motor shaft with dual ball bearings. Heavy-duty cast iron casing and seal plate ensure years of service and reliability. The Pump should be installed at the water source or in a home, farm, or cabin to protect from freezing.


Features:
  • Cast iron casing and seal plate for durability and long life
  • A.O. Smith higher than standard NEMA service factor dual compartment motor
  • Dual voltage 115/230V
  • Square D pressure switch preset at 30-50 PSI
  • 1 1/4" suction, 1" NPT discharge and brass flow control valve
  • Pressure gage included
  • Stainless steel motor shaft seal and dual ball bearings
  • Precision engineered thermoplastic impeller, diffuser, nozzle and venturi
  • Clean-out plug to easily unclog nozzle
  • Fully serviceable with two-year warranty

Technical Specifications:
  • Horsepower: 1 HP
  • Flow rate: 25 GPM @ 50' (20 PSI with 5' suction lift)
  • Shut Off @ 153' of Head
  • Voltage: 115/230 V
  • Hertz: 60 Hz
  • Weight: 44 lbs

Warranty:
1 year manufacturers warranty from the date of purchase.
Write a Review
Helpful? Yes {{ (2*reviews[i].feedback_helpful) - reviews[i].feedback_count }} No
Verified Purchase
{{ reviews[i].content.title }}
Reply from PexUniverse:
By {{ reviews[i].content.name }} (from {{ reviews[i].content.location }}) on {{ reviews[i].created_at | formatDate }}
Ask a Question
{{ f.question }}
Helpful? Yes {{ (2*f.feedback_helpful) - f.feedback_count }} No
By PexUniverse Customer Service on {{ f.answered | formatDate }}

Recently viewed products

Top