Peter Mangone RB-5 Manual PEX Clip Gun
Peter Mangone RB-5 Manual PEX Clip Gun

Manual Clip Gun

Peter Mangone

Brand: Peter Mangone

Mfr Part#: RB-5

Availability: In Stock
Usually ships: Today, if ordered by 3pm
Qty Price
$28.95 / each
  • Description
  • Reviews
  • FAQs (2)

Peter Mangone RB-5 Manual Clip Gun is designed for installation of PEX tubing in plumbing and radiant heating applications. PEX Clip Gun is particularly useful for staple-up projects, when installing PEX between the joists and securing it to the wooden/plywood subfloor.

RB-5 PEX clip gun works in a similar manner to a paper stapler, but uses plastic PEX clips with nails instead of metal staples. It does not require a power supply and can be used anywhere at any time. Simply load a strip of PEX clips into the tool, position it over the pipe and shoot the clips.

RB-5 tool is compatible both with Stand-off and Flush Mount PEX Clips. It can hold up to 20 clips max. and comes with a detachable belt clip and user manual.

No reviews yet
Indicate an email address where you wish to receive the answer to your question.
Enter numbers shown above without spaces. This step helps us to prevent automatic submissions.
will these clips work for securing pex water line installation to floor joist?
Read 1 answer
1 of 1 people found this answer helpful.
Yes. This tool and clips work for both radiant heat and plumbing installations. Simply select the proper size clips to match your pipe size.
Answered on 9/15/2017 by PexUniverse Customer Service
Was this answer helpful?  Yes / No
I don't see mention of what size staples (tubing size) it will accommodate. Can I assume the staple spacing is the same distance on 1/2" to 3/4" size clips and this stapler will work with those sizes?
Read 1 answer
5 of 5 people found this answer helpful.
RB-5 works with Peter Mangone flush mount clips (pipe pressed against the mounting surface) and stand-off clips(~1/8" clearance between mounting surface and the pipe) for PEX sizes up to 3/4".
The clip models and corresponding PEX sizes are as follows:

Flush mount:
F5OD - for 1/2" PEX (5/8" OD)
F6OD - for 5/8" PEX (3/4" OD)

P3BK - for 3/8" PEX (1/2" OD)
P4BK - for 1/2" PEX (5/8" OD)
P6BK - for 3/4" PEX (7/8" OD)

The spacing of the clips depends on the pipe size and is usually 2-2.5ft for horizontal pipe runs and 3-4ft on vertical.
Answered on 3/27/2015 by PexUniverse Customer Service
Was this answer helpful?  Yes / No

Similar products

The following was added to your shopping cart: ×

Forgot Your Password?

Enter your e-mail address below.
You will receive an e-mail
with password reset instructions.


Estimate Delivery Date & Cost

Ship to Zip Code:
Qty (Optional):