Flush mount Clips for 1/2" PEX (100/box)
Brand: Peter Mangone
Part#: F5OD
Temporary Out of Stock
Usually ships: Upon availability

Box of (100) F5OD flush mount clips for 1/2" PEX and PEX-AL-PEX tubing.

Each box contains 10 magazines x 10 clips per each. Designed for use with Peter Mangone RB-5 or RB-6 clips guns. Unlike stand-off clips, these (flush mount) clips do not offset the pipe from mounting surface.

Clips are generally installed every 1.5-2.5ft on horizontal runs (depending on pipe diameter - larger PEX sizes require more often stapling) and every 3-4ft on vertical, or as needed.

These clips are made of HPDE and provide excellent holding power. Installations utilizing flush mount clips are far superior to any other method of tubing attachment. Each clip fits perfectly without damaging the PEX tubing - no nicking, no compressing and no piercing. Unique clip design virtually eliminates expansion noises.

Installations with the RB-Stand-Off Clips are strong. Two galvanized nails are driven 5/8" deep into the wood provide holding power that is secure and long-lasting.

Ask a Question
Can you use these stand off clips for mounting the radiant heat on the underside of the sub-floor plywood?
Helpful? Yes No
Yes. It's their most typical use.
By PexUniverse Customer Service on 03/27/2015

Related products

Top