1/2" PEX x 3/8" x 1/2" PEX Reducing Tee
Brand: Everhot
Part#: BPF6914
In Stock
Usually ships: within 1 business days
This product does not meet the new low-lead criteria defined in Safe Drinking Water Act and cannot be used for potable water applications, including for drinking and cooking. This product can be used for non-potable water applications only.

PEX Tee is used to branch off the existing water line where needed.

This crimp style PEX fitting can be installed using the following connection systems:

  • Crimp Connection System (Copper Crimp Rings + PEX Crimp Tool)
  • Clamp (Cinch) Connection System (Stainless Steel PEX Clamps + PEX Clamp Tool)

Size: 1/2" x 3/8" x 1/2" (side x side x middle)
Manufactured to ASTM F1807.
For use with 1/2" & 3/8" PEX Tubing.

Ask a Question
How do you know what side to start from when naming the pex tee? For example, what is the difference between a 3/4 x 1/2 x 3/4 and a 1/2 x 3/4 x 3/4?
Helpful? Yes No
Both of these tees are the same. If a tee is positioned horizontally (straight-through line parallel to the ground and the branch-off pointing up or down), it's read Side x Side x Top/Middle, so which of the sides comes first is of no importance. The last reading indicates the branch-off size.
By PexUniverse Customer Service on 08/31/2015

Related products

Top